单镜头三维粒子成像测速

本文提出了一种用单镜头进行三维流场测量的方法，建立了包括摄录系统、数字图象处理及识别系统及流动装置的３Ｄ－ＳＣＰＩＶ系统。完成了现有条件下的原理性定量测量实验。     

Comparative analysis of the main active components and hypoglycemic effects after the compatibility of Scutellariae Radix and Coptidis Rhizoma

In this study, a rapid and highly sensitive ultra high performance liquid chromatography with triple quadrupole mass spectrometry method with the mobile phase of acetonitrile and 0.1% aqueous formic acid was established and successfully applied to comparatively analyze main active components after their compatibility. Besides, the effects of Scutellariae Radix, Coptidis Rhizoma and combined extracts on type 2 diabetic rats induced by high‐fat diet along with low dose of streptozocin were investigated. Under the optimized chromatographic conditions, good separation of seven target components was achieved within 12 min. All calibration curves exhibited good linearity (R² ≥ 0.999). The relative standard deviation of precision, repeatability and stability varied from 0.69 to 2.23, 0.98 to 2.56, and 0.92 to 2.57%, respectively. The recovery ranged from 91.11 to 105.35%. The contents of seven active components were notably reduced after compatibility; however, the hypoglycemic effect of combined extracts was stronger than single drug by decreasing the activities of fructose‐1,6‐bisphosphatase, glucose 6‐phosphatase, phosphoenolpyruvate carboxykinase and increasing the activities of glucokinase, phosphofructokinase, pyruvate kinase. Accordingly, the established analytical method was accurate and sensitive enough for quantitative evaluation of seven investigated compounds. Moreover, the combined extract had definite effects on type 2 diabetes through multiple components against multiple targets.     

等离子体激励器的静特性与高速特性仿真研究

A parametric study of high-frequency plasma jet actuator was carried out, using the experiment- tally measured energy distribution law of arc discharge as an ideal heat source. The influence of the exit angle of the actuator on the flow field was explored. The jet flow field characteristics of the spark discharge actuator under supersonic flow (Ma0=2.0) were investigated. The results show that the energy density of heat flux increases and the jet front and forward shock wave moves faster with the decrease of discharge region, and the smaller the exit angle of the jet is, the stronger the momentum injection ability of the actuator along the flow direction is. The rule still applies under high-speed air flow conditions. Compared to the static condition, the momentum injection capability of the jet is stronger and the influence domain is larger under supersonic flow conditions.     

窄线宽光纤激光器在1030 nm波段实现3 kW近衍射极限输出

基于大模场面积掺镱光纤搭建了全光纤1030 nm高功率窄线宽光纤激光主振荡功率放大系统,实现了3004 W的最高功率输出,斜率效率69.27%,是目前报道的输出功率最高的1030 nm波段近衍射极限光纤激光器。最高输出功率时,x,y方向的光束质量因子分别为1.169,1.174,3 dB光谱宽度为0.18 nm,放大自发辐射抑制比达到37 dB。     

紫外熔石英元件高精度低缺陷控形控性制造技术研究进展

传统的紫外熔石英元件加工方法本身会引入各类制造缺陷,需要后期加工来消除前期加工带来的缺陷,限制了熔石英元件的加工质量和加工效率。针对这些问题,课题组提出了采用磁流变、离子束、保形光顺和流体动压抛光等可控柔体加工技术提升熔石英元件的加工效果,并开展了相关研究。主要介绍了课题组在关键技术上取得的重要进展,包括亚纳米精度表面控形制造技术、纳米精度本征表面控性生成方法、熔石英元件高精度低缺陷组合工艺与设备等一系列关键技术。通过探讨关键技术及其发展现状,为未来紫外熔石英元件高精度低缺陷制造技术的发展提供参考。     

Preface

<正>Biophysical chemistry is a relatively new branch of physical chemistry.Wikipedia-the free encyclopedia describes it with the following sentences(http://en.wikipedia.org/wiki/Biophysical_chemistry,cited on November 2,2014):"Biophysical chemistry is a physical science that uses the concepts of physics and physical chemistry for the study of     

Coupled bending-torsion vibration of a homogeneous beam with a single delamination subjected to axial loads and static end moments

Delaminations in structures may significantly reduce the stiffness and strength of the structures and may affect their vibration characteristics. As structural components, beams have been used for various purposes, in many of which beams are often subjected to axial loads and static end moments. In the present study, an analytical solution is developed to study the coupled bending-torsion vibration of a homogeneous beam with a single delamination subjected to axial loads and static end moments. Euler–Bernoulli beam theory and the "free mode" assumption in delamination vibration are adopted. This is the first study of the influences of static end moments upon the effects of delaminations on natural frequencies, critical buckling loads and critical moments for lateral instability. The results show that the effects of delamination on reducing natural frequencies, critical buckling load and critical moment for lateral instability are aggravated by the presence of static end moment. In turn, the effects of static end moments on vibration and instability characteristics are affected by the presence of delamination. The analytical results of this study can serve as a benchmark for finite element method and other numerical solutions.